BIBS Baby Glass Bottle - Woodchuck - 225ml

This BIBS Baby Bottle is made from durable and heat resistant borosilicate glass, with a round natural latex rubber nipple, which features an anti-colic valve.

The baby bottle comes with a foldable funnel, making it easy to fill up the bottle fast and easily with less milk or formula waste.

There is also a milk lock, which can be placed under the screw cap and cap, for easy and hygienic storage. This makes it easy to take the bottle out on the go, without having to worry about spilling the milk in the nappy bag or stroller.

Materials:

All parts are made of 100% safe food-grade material

• Bottle - Borosilicate glass
  - Temperature and thermal shock resistant
  - Durable
  - Shatter resistant
  - Chemical and acid degradation resistant
  - Safe and food-grade

• Nipple/Teat - Natural rubber latex
  - Equipped with an anti-colic valve, which reduces air swallowed while feeding
  - The round nipple promotes a similar tongue placement and sucking technique to  breastfeeding
  - The round shape allows the sides of the tongue to elevate and cup around the nipple, just like it does during breastfeeding
  - This helps to prevent “nipple confusion" if both breastfeeding and supplementing with a bottle
  

Size:

225ml (8oz) with slow flow nipple/teat

Inclusions:

• 1 x Glass bottle 225ml
• 1 x Cap
• 1 x Nipple (slow flow)
• 1 x Milk lock
• 1 x Screw cap
• 1 x Foldable funnel

Care:

First use

Clean and sterilise before first use - disassemble and clean by placing all components in boiling water for five minutes

Subsequent cleaning

Nipple/Teat:

The latex nipple/teat must be cleaned and sterilised before each use by scalding

• Pour it with boiling water and let it soak in the water for approximately five minutes
• Pick it up and let it dry on a clean towel

DO NOT use microwave sterilising, cleaning products or a dishwasher, as it will break down the natural rubber latex.

Renew the nipple/teat after using it for 4-6 weeks, for safety and hygiene reasons. Please do not leave the nipple/teat in direct sunlight.

Always inspect the nipple/teat before each use by pulling it in all directions and inspecting carefully before use - replace the nipple at the first sign of damage or weakness.

Milk lock/Screw cap/Ring/Glass Bottle:

• Wash with hot water and soap, or wash in the dishwasher
• Pour components with boiling water, to make sure all soap residue is gone
• Let all the parts dry completely before re-assembly

Note: DO NOT heat any plastic parts or the nipple/teat in a microwave - the glass bottle can withstand microwave heating, but it's recommended that you wash it as mentioned above, to ensure it is absolutely clean